Combination of Grit 2000 & 6000 Sharpening : 2000 Grit for fine honing and 6000 grit to achieve a -sharp finish blade. Big enough to handle even the , and designed to fine-tune any blade Widely Used Water Stone: Not only work for kitchen knives, gardening tools also shaving and cutting gadgets, Woodworking and Carpentry Kit etc just except serrated blades and ceramic knives Premium Material: Come from first-class white corundum, resist corrosion, heat and friction Safe Sharpening: Equipped with a non- silicone base for honing securely Sharpening Guide Included: As easy as pie, even for green hands, all you need is Water, no oil required 2000 Grit for Fine Honing Used to repair the seriously damaged edge, suitable for knives. Hold at an angle of 10 - 30 , grind the edge on the surface of stone back and forth with gentle pressure until the edge is sharp enough. 6000 Grit for -Sharp Polishing Used to eliminate burrs of the edge. Polish the edge gentler pressure until smoothly and keenly. It can not only hone cleavers, shears, scythes also scissors, razors, axes, chisels, etc just except serrated blades and ceramic knives It's made of white corundum and with a rubber holder for holding the stone securely while honing. Honing Instructions: 1. the stone in the Water for 5 minutes, and then put it on a steady platform 2. Use 2000grit side for coarse grinding at 10~30 degree angle gently for 15 minutes. Then Polish the edge for 10 minutes with 6000 Grit side. 4. Keep some Water on the stone to stay cool. 5. After honing, clean with wet cloth or Water, then dry it. 6. Use a soft brush to clean the stone, then put it in a ventilated place to dry. Material: White Corundum Color: Brown + White Dimension of stone: 18*6*3cm Particle size: 2000 grit (Brown Side), 6000 grit (White Side) Weight: 22.93oz Package Contents: 1 x Sharpening Stone 2000/6000 grit 1 x base holder Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the a little different from the real thing. The measurement allowed error is +/- 1-3cm.