w Comica LinkFlex AD1 XLR adapter to 3.5mm TRRS

٣٧٩٫٠٠ ر.ق.‏
والشحن مجاناً

w Comica LinkFlex AD1 XLR adapter to 3.5mm TRRS

  • العلامة التجارية: Unbranded

w Comica LinkFlex AD1 XLR adapter to 3.5mm TRRS

  • العلامة التجارية: Unbranded
السعر: ٣٧٩٫٠٠ ر.ق.‏
البائع:
٣٧٩٫٠٠ ر.ق.‏
والشحن مجاناً

في المخزون

نقبل وسائل الدفع الآتية

الوصف

w Comica LinkFlex AD1 XLR adapter to 3.5mm TRRS

Comica LinkFlex AD1 XLR to 3.5mm TRRS Adapter None Comica Audio LinkFlex AD1 XLR is an XLR-to-3.5mm TRRS audio adapter that allows the integration of microphones with in XLR and real-time monitoring for vlogs, interviews, live streaming and videography. Designed for use with iOS or Android cameras and mobile devices, the LinkFlex XLR features a three-position switch that allows you to easily select between smartphone or DSLR compatible modes, as well as an off position to save battery power. Optimize signal levels by adding up to 10 dB of gain with stepless volume control. Connect the Balanced 3-pin XLR LinkFlex AD1 jack to a microphone that does not require phantom power (such as a dynamic microphone or battery powered capacitor). clip the control unit to your belt, then connect the 3.5mm TRRS plug to your mobile device or camera. With the 3.5mm headphone output of the control unit, real-time monitoring is as simple as plugging in a headset. With an over 16 inch cable between the XLR jack and your smartphone or DSLR, you can keep a proper recording distance without extension cords. Features: Perfect for simultaneous audio recording and monitoring Designed for dynamic microphones equipped with XLR and condenser mics that do not require phantom power Built-in preamplifier provides up to 10dB of gain through smooth gain control 3-position switch for easy off or smartphone or DSLR selection 3-pin female XLR with 12.4 'cable 3.9' cable with 3.5mm mini TRRS plug connects with a mobile device or DSLR camera The 3.5mm stereo headphone output on the control unit allows you to monitor the headphones in real time Powered by one CR2032 3V battery For 40 hours of standby The LED indicator turns red when the battery level is low ii is low or stays green under normal operating conditions Back panel clip for attaching the Control Unit to a belt or bag " Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement.
  • هوية Fruugo: 442081130-928187003
  • EAN: 9104739641181

التسليم والرد

يُرسل خلال ٢ أيام

  • STANDARD: مجاناً - التسليم بين الاثنين 15 ديسمبر 2025 – الاثنين 22 ديسمبر 2025 - مجاناً

يُشحن من الصين.

نحن نبذل قصارى جهدنا لضمان أن تصلك المنتجات التي تطلبها بالكامل وطبقاً المواصفات التي حددتها. إلا أنه في حال تلقيك طلب غير كامل أو أغراض تختلف عن تلك التي طلبتها أو كان هناك سبب آخر يدعوك لعدم الرضاء عن الطلب، فيمكنك رد الطلب أو أي منتجات يتضمنها الطلب واسترداد ما دفعته من أجل تلك الأغراض بالكامل. عرض سياسة الرد الكاملة

تفاصيل امتثال المنت

يرجى الاطلاع على معلومات الامتثال الخاصة بهذا المنتج الموضحة أدناه.

يتم توفير المعلومات التالية من قبل بائع التجزئة المستقل التابع لجهة خارجية الذي يبيع هذا المنتج.

الجهة المصنعة:
توضح المعلومات التالية تفاصيل الاتصال الخاصة بالجهة المصنعة للمنتج ذي الصلة والذي يُباع على Fruugo.

  • Foshan Panweibai Trading Co., Ltd.
  • Foshan Panweibai Trading Co., Ltd.
  • Room 103, No. 57, Shalong Road, Jiujiang Town, Nanhai District, Foshan City
  • Foshan
  • CN
  • 528203
  • razer0815@outlook.com
  • 13790744267

الشخص المسؤول في الاتحاد الأوروبي:
توضح المعلومات التالية معلومات الاتصال الخاصة بالشخص المسؤول في الاتحاد الأوروبي. الشخص المسؤول هو المُشغل الاقتصادي المُعيّن والكائن في الاتحاد الأوروبي والمسؤول عن التزامات الامتثال المتعلقة بالمنتج ذي الصلة الذي يُباع داخل الاتحاد الأوروبي.

  • Jean Luc
  • In Memoria Futuri SAS
  • 3 RUE DU PAS DE LA MULE 75004 PARIS
  • Paris
  • France
  • 75004
  • infoapexchen@gmail.com
  • 33745713901