This Di Vapor polished chrome door pivot hinge is designed for use with glass doors and glass panels. The solid copper hinge weighs 385g (0.385 kg) and is manufactured to high-quality standards. It is commonly used by designers and architects. Sold individually—one hinge per order. **Technical Information – Dimensions:** For detailed dimensions, refer to the technical diagram in the product images section. - **Glass Thickness:** 6–8mm - **Material:** Copper - **Finish:** Polished mirror chrome - **Total Width of Fixing Plate:** 75mm - **Distance Between Fixing Holes:** 66mm at the furthest point, 28mm at the closest point. Hole diameter: 8.7mm - **Total Height:** 76.4mm **Fixing Hole Information:** One fixing hole connects to the shower glass door. The hole in the glass must be at least 8mm in diameter, as the bolt measures approximately 7.7mm. - **Maximum Door Weight Load:** 25kg per hinge. Adhere to this weight limit when determining the number of hinges per panel. For most applications, 2–3 hinges per side are recommended. Maximum glass door width should not exceed 700mm. - **Typical Installation:** Two hinges are usually required—one at the top and one at the bottom of the glass screen. - **Quantity:** 1 hinge per order **Tools Needed:** 5mm Allen key and 2.5mm Allen key