suitable for PH Meter Calibration Solution 4.0 7.0 10.01 PH Pens Calibration Solution Probe Liquids PH Calibratio-YI WU CHUN HUI

٥٤٫٠٠ ر.ق.‏
+ ٣١٫٩٩ ر.ق.‏ الشحن

suitable for PH Meter Calibration Solution 4.0 7.0 10.01 PH Pens Calibration Solution Probe Liquids PH Calibratio-YI WU CHUN HUI

  • العلامة التجارية: Unbranded

suitable for PH Meter Calibration Solution 4.0 7.0 10.01 PH Pens Calibration Solution Probe Liquids PH Calibratio-YI WU CHUN HUI

  • العلامة التجارية: Unbranded
سعر البيع القطاعي المقترح: ١١٩٫٠٠ ر.ق.‏
السعر: ٥٤٫٠٠ ر.ق.‏
أنت توفر: ٦٥٫٠٠ ر.ق.‏ (54%)
البائع:
٥٤٫٠٠ ر.ق.‏
+ ٣١٫٩٩ ر.ق.‏ الشحن

في المخزون

سياسة الإرجاع لمدة 14 يوما

طرق الدفع:

الوصف

suitable for PH Meter Calibration Solution 4.0 7.0 10.01 PH Pens Calibration Solution Probe Liquids PH Calibratio-YI WU CHUN HUI

suitable for PH Meter Calibration Solution 4.0 7.0 10.01 PH Pens Calibration Solution Probe Liquids PH Calibratio-YI WU CHUN HUI Note:Due to different production batches, there are slight differences between the actual product and the picture, which will not affect normal use. Calibration Solution for pH meters, is a solution of a known and fixed pH level that is used to calibrate pH meters. It can also be used to check the accuracy of pH meters. The pH buffer should be used regularly to ensure that the pH meter readings are accurate, as an incorrect acidity level of the nutrient solution can result in your plants not being able to take in the nutrients they need. The pH meter requires at least a two-point calibration. For example, if you need to calibrate the pH reading on the meter, both a pH 7 buffer and a pH 4 buffer are required. How to Calibrate the pH Meter: 1. Rinse the electrode with clean water and wipe it dry. Turn on the pH meter and adjust to pH mode. 2. lmmerse the electrode in the pH 7.00 buffer solution and wait for the reading to stabilize. Press and hold the "CAL"button for 5 seconds the screen will display "CAL" and the pH 7.00 calibration is complete when pH 7.00 flashes 3 times. 3. Rinse the electrode with clean water and wipe dry. 4. Repeat the above calibration steps to calibrate pH 4.00 and pH 10.01. Notes: 1. Keep the electrode moist to ensure the life of the electrode. If it is dry, only three drops of protective liquid are needed. 2. After using the calibration liquid, wash the probe with clean water to avoid contamination of the calibration liquid by residual liquid carried by the probe. 3. After using the calibration liquid, please tighten the cap to protect the liquid, which can be reissued for use. 4. For you to protect the liquid, please store the liquid in a cool place where the sun does not shine directly. 5. It should be put in a place where children can not take, to avoid accidental ingestion. Colour:As Shown Material:Plastic Package Contents: 1 * 50ML 4.00 PH Please pay attention to the title and description when buying, and pay attention to the title and description when buying.
  • هوية Fruugo: 356346038-774586339
  • EAN: 427445377236

معلومات سلامة المنتج

يرجى الاطلاع على معلومات سلامة المنتج الخاصة بهذا المنتج الموضحة أدناه

يتم توفير المعلومات التالية من قبل بائع التجزئة المستقل التابع لجهة خارجية الذي يبيع هذا المنتج.

رقم جزء الشركة المصنعة: I500800483
رقم سري: I500800483

التسليم والرد

يُرسل خلال ٢ أيام

  • EXPRESS: ٣١٫٩٩ ر.ق.‏ - التسليم بين الجمعة 02 يناير 2026 – الاثنين 12 يناير 2026 - أرخص - أسرع

  • STANDARD: ٣١٫٩٩ ر.ق.‏ - التسليم بين الاثنين 05 يناير 2026 – الثلاثاء 13 يناير 2026

يُشحن من الصين.

نحن نبذل قصارى جهدنا لضمان أن تصلك المنتجات التي تطلبها بالكامل وطبقاً المواصفات التي حددتها. إلا أنه في حال تلقيك طلب غير كامل أو أغراض تختلف عن تلك التي طلبتها أو كان هناك سبب آخر يدعوك لعدم الرضاء عن الطلب، فيمكنك رد الطلب أو أي منتجات يتضمنها الطلب واسترداد ما دفعته من أجل تلك الأغراض بالكامل. عرض سياسة الرد الكاملة

تفاصيل امتثال المنت

يرجى الاطلاع على معلومات الامتثال الخاصة بهذا المنتج الموضحة أدناه.

يتم توفير المعلومات التالية من قبل بائع التجزئة المستقل التابع لجهة خارجية الذي يبيع هذا المنتج.

الجهة المصنعة:
توضح المعلومات التالية تفاصيل الاتصال الخاصة بالجهة المصنعة للمنتج ذي الصلة والذي يُباع على Fruugo.

  • Electronics Spares
  • Shenzhen Yongfuli Industrial Co., Ltd
  • Room 1701, Hongyu Building, Longguan Road, Shitouling, Yucui Community, Longhua Street, Longhua District, Shenzhen
  • Shenzhen
  • CN
  • 518000
  • jindfbolw@163.com
  • 8613246670546

الشخص المسؤول في الاتحاد الأوروبي:
توضح المعلومات التالية معلومات الاتصال الخاصة بالشخص المسؤول في الاتحاد الأوروبي. الشخص المسؤول هو المُشغل الاقتصادي المُعيّن والكائن في الاتحاد الأوروبي والمسؤول عن التزامات الامتثال المتعلقة بالمنتج ذي الصلة الذي يُباع داخل الاتحاد الأوروبي.

  • PROCONSEIL FR
  • PROCONSEIL FR
  • 8 bis rue Abel 75012 Paris, France
  • Paris
  • FR
  • 75012
  • SophieDupont@proconseilfr.com
  • 33780843245