Lamp holder with PIR motion sensor compatible with E27 bulb sockets. Coverage area: 360 and 6 meters in diameter. Recommended installation: 2.2 m in height. Time setting: 10 seconds to 5 minutes Twilight (light) setting: 3-2000 lux Suitable for incandescent lamps, energy-saving lamps and LEDs up to 60 W. Recommended for indoor use (garages, verandas, entrances, etc.) but not suitable for lamps with tulip. Socket with PIR infrared motion sensor Socket with adapter for E27 bulbs with infrared motion sensor. Designed to install the socket on the ceiling, recommended for use in garages, home entryways, or porches. Adjust light on time from 10 seconds to 5 minutes. In Besides, it regulates the light at which you want the sensor to start working. Technical specifications: Product dimensions: 5.6 cm x 11.72 cm. Coverage range: 360. Coverage distance: 6 meters. Time setting: 10 seconds - 5 minutes. Twilight setting: 3 - 2000 lux Contact capacity: Maximum 60 W (both for incandescent lamps, energy-saving lamps and LED lamps). Infrared motion sensor for installation as a bulb adapter. < p>It is recommended to use it for garages, porches, and house entrances... Take advantage of an existing light point and use the socket adapter without the need to connect another type of detection device.