Control your LED lights with ease using this RF Wireless Remote Control! On/Standby: Power your lights on or off with a single press. The unit remembers its previous state. Lighting Mode: Switch to a steady lighting mode from dynamic effects. Dimmer Shortcuts: Instantly adjust to 100%, 50%, or 25% brightness. Dynamic Mode Adjust: Transition from lighting mode to dynamic mode, or cycle through various dynamic effects. Speed Adjustment: Control the speed of dynamic modes. Increase the pace with SPEED+ or slow it down with SPEED-. Brightness Adjustment (Dimmer): Fine-tune the brightness in lighting mode. Use BRIGHT+ to brighten and BRIGHT- to dim. Key Features: Dimmer & Dynamic Control 8 Dynamic Effects 10-Level Dimmer 256-Grade PWM for smooth dimming Adjustable Speed Compact Card-Type Remote Ultra-Slim Design Smooth Dimming Effect 1-to-1 Remote Pairing Auto-Save Function Installation: 1. Power: Accepts DC 5V to 24V. Connect the red wire to positive and the black wire to negative. Choose the appropriate power supply for your LED application. 2. LED Output: Connect the red wire to the LED positive and the black wire to negative. Maximum output current is 12A. Reduce the load if the main unit overheats. CAUTION: Do not short-circuit the LED output, as this may cause permanent damage! 3. Remote Control: Remove the insulating tab before use. The RF wireless signal can pass through obstacles, so aiming at the main unit is unnecessary. For optimal signal reception, avoid installing the main unit in enclosed metal spaces. Note: The remote control battery is a 3V CR2025 type. Specifications: Dynamic Mode: 8 modes Dynamic Speed Level: 10 levels Brightness Level: 10 levels PWM Grade: 256 grades Smooth Dimming Effect: Yes Working Voltage: DC 5 ~ 24V Output Current: Peak 12A Remote Control Mode: RF Wireless Remote Frequency: 433.92 MHz Remote Distance: >15m in open area Battery Type: 3V CR2025 (battery included) Quantity: 1 Set Package Includes: 1 x RF Remote Control (battery included) 1 x LED Mini Dimmer