Item Type: Rail Slide Stage Material: Steel, electroless nickel plating Model: SPX615-L Moving Direction: X axis Table Size: Approx. 60 x 60mm / 2.4 x 2.4in Table Height: Approx. 20mm / 0.8in Moving Amount: Approx. 15mm / 0.6in Load (kg): 10 Maximum Speed (mm/s): 10 Parallelism (m): 15 Straightness (m): Within 3 Single-phase Positioning Accuracy (m): 15 Repeat Positioning Accuracy (m): 1.5 Sensor: NPN open circuit output limit + origin 2-Phase Stepping Motor: 1.3A/phase Power Supply: Up to DC48V Input Pulse Frequency: Maximum 300KHz How to Use: 1. Install the sliding table 2. Connect the drive data cable Package List 1 x Slide Table 1 x Data Line 1 x Drive 4 x Bolt 1Made of aluminum alloy material, lightweight, resistant to friction, scratchresistant, dropproof and corrosionresistant 2Using PI control algorithm, low noise, low vibration and low heat with stable performance 3Convenient to set current, 16 levels optional, the peak output current can be up to 2.2A 4Can drive 4, 6, 8 wire 2phase stepping motors, with automatic parameter adjustment function for different motors 5Adopt multi-layer board and surface mount seal, high reliability, enough margin for power devices