Quartz Outdoor High Torque I-axis Movement Mechanism Motor Extra Long Hands Features: 1. Hand model: HR9715, measured from the centre hole, hour hand 154mm, minute hand 208mm, for use on wall clocks with a panel diameter of approximately 440mm. 2. The hands have a protective film on their surface, which can be removed when in use. 3. Movement model: HR1688-15, total shaft length 15mm, thread height 6.7mm, suitable for wall clocks with a panel thickness of about 3mm. 4. The movement housing is made of ABS, an environmentally friendly material. Specification: Crystal frequency: 32.768KHz Timekeeping accuracy: ±30Sec/Month at 1.5V DC. 25°C (unadjusted) Current consumption: Less than 190μA at 1.5V DC. Operating voltage: 1.3V to 1.7V Rated voltage: 1.5V Operating temperature: -10°C to 50°C Weight: Approx. 26g/PCS Seconds output torque: ≤0.6gf-cm (1.5V) Minute hand output torque: ≤40gf-cm (1.5V) Pointer specification requirements: Length/weight of second hand: ≤130mm, ≤2g Minute hand length/weight: ≤280mm, ≤6g Second hand unbalance torque: ≤0.15gf-cm Unbalance torque of minute hand: ≤6gf-cm Package Included: 1*Movement 2*Hands 1*Hook 2*Nut 1*Washer 1*Gel Pad Note: 1. Due to manual measurement, please allow 1-3mm error. Please make sure you don't mind before ordering. 2. Please allow 1-3 gram weight error. Please make sure you don't mind before ordering. 3. Due to different lighting in the photos and differences in monitors, the pictures may not reflect the actual colour of the object. Please make sure you don't mind before ordering, thank you!