PC Power Switch Extension Cable with Adapter for External Motherboard Start/Reset

1. Compatibility: The motherboard’s F_PANEL header has a 2.54 mm pin pitch; the front panel switch cables are individual wires, not a single integrated connector. 2. This external switch supports full power-on and reset functionality. POWER LED and HDD LED indicators are externally visible. 3. The power button is positioned on the right side; the reset button is on the left. The POWER LED features a multicolor cycling light effect under the translucent keycap (controlled by an integrated LED chip). The HDD LED is visible through a small aperture in the center of the unit. 4. Keycap icons are translucent. Dual-color cycling LEDs are embedded beneath both buttons. The lighting cannot be modified or customized. To disable the POWER LED, simply leave the POWER LED cable unconnected. Installation Instructions: 1. Connect the switch’s individual wires directly to the corresponding pins on the motherboard’s F_PANEL header. 2. Mount the switch in any convenient location—either by using the included double-sided adhesive pads or by securing it with the provided cable ties. Specifications: Includes adapter Note: To retain the original front-panel reset function while adding this external switch, use the included one-to-two adapter (designed for 2.54 mm pitch, 9-pin headers) to split the signal—enabling simultaneous operation of both the original front panel and the external switch. Color: Black Material: Aluminum + Plastic Package Contents: 1 x Desktop Power Switch 2 x Double-Sided Adhesive Pads 2 x Cable Ties 1 x Adapter