Mini Multifunction Graver Tool Cordless Engraving Tool Kit Electric Engraving Pen <p>The cordless design is overall compact, does not take up space, and is easy to carry anywhere. Ideal for professional engravers and engraving beginners. The engraving pen can be used for small and medium-sized engraving, sanding, carving, drilling, and lettering, etc. It can be used to engrave wood, jade, metal, beeswax, glass, porcelain, and jewelry.</p> <p>𝐒𝐫 𝐞𝐭 𝐃𝐮𝐫𝐚𝐛𝐥𝐞: The bit of the engraving pen is held in place by screws. The engraving tool has a small L-shaped wrench at the base. After inserting the bit, the wrench is aligned with the hole and then tightened to hold the bit firmly in place. The advantage of screw fixation over the direct insertion fixation method is that the drill does not shake and is more precise and stable. The engraving results are better.</p> <p>𝐂𝐨𝐧𝐭𝐫𝐥𝐞 𝐝𝐞 𝐋𝐚 𝐕𝐢𝐭𝐞𝐬𝐬𝐞 𝐏𝐚𝐫 𝐓𝐨𝐮𝐜𝐡𝐞 𝐔𝐧𝐢𝐪𝐮𝐞: Different speeds are applied to different engraving materials, allowing flexible adjustment according to engraving needs. There are 3 speeds with speeds of: 5000-10000-18000r/min. (Note: When the resistance is too high, the overload indicator lights up, and the automatic power off effectively protects the life of the engraving pen).</p> <p>𝐂𝐡𝐚𝐫𝐠𝐞𝐦𝐞𝐧𝐭 𝐔𝐒𝐁 𝐒𝐚𝐧𝐬 𝐅𝐢𝐥: This electric engraving pen kit is equipped with a TYPE-C charging port. It can work for more than 1 hour. It can work for more than 1 hour from no load at speed 3 after a full charge. Charging is fast, up to 80% in 30 minutes and 100% in 60 minutes. You can also charge and use the device at the same time. In addition, the sound of this cordless rotary tool is very low during work.</p> <p>𝐔𝐧 𝐓𝐨𝐭𝐚𝐥 𝐝𝐞 𝟒𝟏 𝐀𝐜𝐜𝐞𝐬𝐬𝐨𝐢𝐫𝐞𝐬: 1 micro engraving pen, 32 drill bits, 5 stencils for graphics and letters, 3 serrated circular cutting blades for all your needs, from fine grain to deep grooves. (Please fully charge the product after receiving it before using it). Please feel free to contact us for any questions you may have during use. We will provide you with a solution within 12 hours.</p>