LS Engine Swap Fuel Filter and Pressure Regulator Kit Compatible with C5 Corvette EFI Conversion This filter/regulator assembly is commonly used when adapting return style fuel systems for use with returnless applications. Popular for simplifying the fuel system for LS swaps or standalone EFI systems such as Holley, FiTech, or FAST designed to operate on 58psi of static supply pressure. When mounted near the fuel tank this filter allows you to run a single fuel feed line to the engine and just a short return loop back to the tank. This is the correct filter/regulator required for LS Swaps using returnless style fuel rails and also popular when doing popular the TBSS/NNBS Gen IV intake manifold swap. Using this filter/regulator between the returnless style fuel rails and your return style fuel lines allows for a plug and play style conversion for retrofitting TBSS/NNBS intake manifolds onto 99-04 return style NBS (Silverado/Sierra) truck and other applications. This fuel filter features an internal bypass that regulates fuel output pressure to 58psi (4 Bar). The filter features a 3/8 male inlet, 5/16 male return outlet, and a 3/8 female supply outlet. This fitting combination makes for simple plumbing of fuel systems for LS Swaps and aftermarket EFI conversions. Colour:Silver Material:Metal Note: These filter/regulators are flow limited to a maximum of 255lph. Beyond that volume, the internal regulator does not have the ability to maintainadequate return volume at low engine speeds. Package Contents: 1 * Fuel Filter Fuel Pressure Regulator with fittings Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.