CAR ENGINE PUSH-IN STARTER RFID KEYLESS ENGINE START-UP KEYLESS SYSTEM BLOCK ENTRANCE WITHOUT KEYS RFID PUSH-IN STARTER CAR ENGINE RFID Key for opening the sound and panel and key for starting and stopping the car. Remote start when closing the door. 10 minutes parking with countdown and has a test interface. Adjust your access system or keyless system. Suitable for all types of cars. PACKAGING LIST 1 x Starter Host 1 x Button 1 x RFID Sensor Ring 2 x RFID Cables 1 x Cable 1 x Manual KEYLESS ENGINE START-UP This is a 12V keyless car opening kit with RFID remote control. It has a key to open the sound and panel and a key to start and stop the car. It also has parking with a countdown of 10 minutes and a test interface. Suitable for all types of cars. KEYLESS SYSTEM Color: as shown Material: ABS Size: 9 x 7 x 4,8 cm Working Temperature: 40℃100℃ Voltage: 12V Working current: 3mA Key for opening the sound and panel and key for starting and stopping the car. Remote start when closing the door. 10 minutes parking with countdown and has a test interface. Adjust your access system or keyless system. Suitable for all types of cars. Main unit 1. Alarm: turn off the ACC and stop the car, the system will automatically go into armament mode after 15 seconds Excellent performance: This printer print head has clear resolution, strong layering, good compatibility and smooth printing effect. Disarm: In weapon mode, when the responder approaches the wire circle, the system will make a “BI, BI” sound, which means the system is disarmed 3. Code Learning: Press and hold the button on the PCB for 5 seconds when you hear 1 time the sound, which means the system is learning the mode.