Product name: Paper quilling tassel machine Product size: 95mm*70mm*85mm Product packaging: 1 piece/bag Tassel size: 0.25mm-2.2mm Cutting method: manual cutting Product weight: 0.27KG Material: aviation aluminum + same + alloy steel + rubber Paper size: 4mm-14mm 1. Durable Scissor-type cutter, which can reduce the wear between the blades, greatly prolong the service life of the blade and the machine. 2. Cut paper flat Patented paper feeding technology, the cut tassel is smooth and not warped. 3. Adjustable Knob screw, adjustable tassel width, narrow, long, short 4. Safety Manual cutting, no power supply required, safe and environmentally friendly! Scissor-type cutting knife, no blade is safe and secure! Fully manual debugging and polishing to ensure that each one is a fine product Bearing structure cutting is smooth, experience manual fun! Usage method 1.Loosen the screws ,Pull the baffle outward. 2.Comb the quilling strip with your hand, so that the head is slightly tilted upwards (Make sure the paper head is flat, no glue head) 3.Pass the quilling strip under the paper guide column and send it all the way to the roller (If the paper is not easy to deliver, you can use tweezers or a small tool to assist the operation) 4.Press down on the paper spool with your thumb and middle finger, and continue to feed the paper strip to the right side of the roller 5.Push the baffle inwards against the quilling paper, and tighten the screws lightly (note that the baffle can only lean against the quivering paper lightly, not too tight) 6.Start cropping (When cutting, you can put the machine flat on the table to cut, or you can hold it in your hand to cut) _x000D_