Dimmable LED Push Switch 110V-240V with Memory Feature for Driver and Ballast Speed Control

Small Dimmer for Drivers or Ballasts. Unidirectional and broadcast communication. Control via conventional push-button, with or without memory: - Short press: turn on/off light. - Long press: dimming up/down. Dimming speed adjustable by rotary knob. Address setting: 1. Address value = Left rotary switch value × 10 + Right rotary switch value. Example: Left = 5, Right = 4 → Address = 5 × 10 + 4 = 54. 2. Unicast mode: Address values 0–63 correspond to addresses 00–63. Group mode: Address values 70–85 correspond to groups 0–15. Broadcast mode: Left rotary switch value = 9. PUSH dimming speed setting: - The closer the knob is turned to the maximum position, the faster the PUSH dimming speed. - The closer the knob is turned to the minimum position, the slower the PUSH dimming speed. Memory function setting: - Short press the "SET" button to toggle memory function. - Without memory: LED indicator is red. After dimming and power cycle, light returns to maximum brightness. - With memory: LED indicator is green. After dimming and power cycle, light restores last brightness. - Factory default: Without memory. Push-button function: - Short press: Turn on/off light. - Long press: Dimming up/down. Warnings: - Do not install with power applied to the device. - Do not expose the device to moisture. Color: White Material: Plastic Package Contents: 1 × LED Dimmer (Note: Appearance may vary slightly between batches; this does not affect functionality.) Other products are not included. Note: Light reflection and display differences may cause slight color variation between image and actual product. Measurement tolerance: ±1–3 cm.