Features: _x000D_ With transparent acrylic shell, easy to read while protecting the module _x000D_ Using LCD display screen, Voltage and Current can be displayed simultaneously _x000D_ Using button adjustable voltage, left button to reduce the voltage, the right button to increasing voltage. press button one time can adjust 0.04V voltage, press and hold more than 1 second to quickly adjust voltage. _x000D_ Can withstand 100,000 presses; Compared with similar potentiometer voltage regulation more convenient and fast. _x000D_ Only can be used as a step down converter, and input voltage should be >1V higher than output. _x000D_ _x000D_ _x000D_ Specifications: _x000D_ Input Voltage: DC 8V~60V (Recommended within 55V, Input voltage must be higher than the output voltage 1V above) _x000D_ Output Voltage: DC 3V~32V Continuously adjustable (It can save the last set voltage automatically) _x000D_ Output Current: Max 7A (Recommended use within 5A, Please pay attention to heat dissipation.) _x000D_ Accuracy: 1%, the voltage three bits display, the current two bits display, the unit is "A". _x000D_ Input Anti-reverse Protection: Yes _x000D_ Short Circuit Protection: Yes_x000D_ Conversion Efficiency: Max up to 95% _x000D_ Load Regulation S(I): 0.8% _x000D_ Voltage Regulation S(U): 0.8% _x000D_ Size: 62 x 44 x 18mm / 2.59 x 1.73 x 0.7in_x000D_ Weight: 67g _x000D_ _x000D_ _x000D_ Voltage Calibration Method:_x000D_ Power-off no load status, press and hold the left button access the power supply, release the left button, the display voltage starts flashing, then using multimeter measured the output terminal voltage, press the left and right keys to adjust the module display voltage value is the same as the multimeter display voltage value, for example: multimeter measurement is 12.6V, then the module can be transferred to display 12.6V, three seconds automatically save, re-power that voltage calibration is complete. The error can be calibrated within 0.04V, if the error is greater, you can try to calibrate again._x000D_ _x000D_ Current Calibration Method:_x000D_ After calibrated the voltage is completed, connect the load, with a multimeter to measure the actual current value, power off the power supply, then press and hold the right button access the power supply, release the right button, the display current value starts to flash, press the left and right keys to adjust the module display current value is the same as the multimeter display current value, such as: multimeter measurement is 1.8A, then the module can be transferred to display 1.8A, three seconds automatically save, re-power that current calibration is complete. _x000D_ _x000D_ _x000D_ Package includes: _x000D_ 1 x Step-Down Module Kit _x000D_ 1 x Acrylic shell _x000D_ _x000D_ _x000D_ Note: _x000D_ If it is used for charging, after charging, please first disconnect the battery end and then the input end to prevent the battery from damaging the module by backflow. Or at the output end add a diode preventing backflow