DC12V/24V LED Light Human Body Induction Kit Smart Stair Step Light Sensor Controller 2025

Item Type: LED Light Induction Kit_x000D_ Product Model: LTK01_x000D_ Input Voltage: DC12V/DC24V_x000D_ Output Voltage: DC12V/DC24V_x000D_ Output Power: Single Step 15W, Total Power: 400W_x000D_ Ports: 32_x000D_ Induction Head: 2 (AB)_x000D_ Protection Class: IP20_x000D_ Signal Mode: Human Body Induction_x000D_ Control Method: Induction Control_x000D_ Control Range: Approx. 30 meter / 98.4ft_x000D_ Interface Type: For DuPont Interface_x000D_ Applicable Scene: Home, hotel, bar_x000D_ _x000D_ _x000D_ Insert the LED strips into the controller ports of the corresponding stair steps in sequence._x000D_ For Example: _x000D_ The lamps on the first step are directly inserted into the interface 1 corresponding to the controller; the lamps on the second step are directly inserted into the interface 2 corresponding to the controller; the lamps on the third step are directly inserted into the interface 3 corresponding to the controller; and so on_x000D_ This controller has 32 ports. According to the actual situation, you can insert the required light strips in order and do not need to pay attention to the redundant ports. You can also add light strips later._x000D_ Lamp Controller Interface: For DuPont interface, left +, right ?_x000D_ LED Stair Light Sensor Controller Operating Instruction: _x000D_ Number of Stair Steps Settings: _x000D_ Press and hold the Settings 2 button for 2s, the red light flashes, and then press the Settings 1 button to select the number of stairs to set. After selecting, release the hand for 5s and the red light will turn off, and the setting is complete._x000D_ Lighting Speed Setting: _x000D_ Press and hold the Setting 1 button for 2s, the red light flashes, and then press the Setting 1 button to set the speed 1?5, 1 is the slowest, 5 is the fastest; The light goes out and the setting is complete._x000D_ Brightness Settings: _x000D_ When the LED Light is on, press the Setting 2 button to enter the 5 level brightness selection lighting delay setting: _x000D_ Press and hold Setting 1 button for 3s, enter the delay settings 1?5 levels, respectively, the first level is a delay of 10s, the second level is 20s, the third level is 30s, and the fourth level is 40s, fifth level is 50s. Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement.