Crimping machine do RJ45/RJ12 through plugs Getfort NGF-09 (knife, insulation stripper) Destiny The Getfort NGF-09 tool is dedicated do earning plugs so-called. through, in which the wires after entering the do plug protrude from the front, making it easier to check the correctness of their arrangement. When crimping the plug, the protruding wires must be cut, do which is used by an additional blade. The tool also allows you to earn standard (non-through) plugs. Principle of operation The crimper allows you to crimp the cable on modular plugs (necessarily through plugs) by dragging the cable through such a plug. When fully clamped at the end, the crimper cuts off excess wires from the plug. The advantage of nad traditional crimping of connectors is that this system allows you to drag wires through the plug and arrange them evenly. This guarantees a much better and more precise tightening of the plug The device together with double arms will be used do crimping all kinds of terminations of RJ-11, RJ-12 and RJ-45 RJ45 through connectors. An additional insulation stripper has been built into the tool. Thanks to a special ratchet mechanism, insufficient pressure of the connectors has been prevented. Thanks to its simplicity and multifunctionality, the device will meet the expectations of amateurs, professional fitters and professionals. Specification: RJ-45, RJ-12, RJ-11 Modular Connector Crimper The crimper features a clutch mechanism for accurate plug clamping It has a built-in cable insulation puller It has a do knife to accurately trim cable wires before inserting do tip Crimper handles made of good quality plastic Packed in original blistered box It has an even crimping system for all we pins of the plug