The product is designed in accordance with the differential wiring specification at the hardware level, and has passed the industrial control-level electromagnetic interference test. The built-in power supply is directly introduced from the power supply, which isolates the USB bus power supply and prevents interference from the motherboard and other electrical equipment. (pipeline) step filtering 2. Effectively filter ripple interference 3 Buffer compatible with large clutter, its instantaneous buffer current can reach 5-6.8A to provide "0" Hz power supply quality compatible with USB devices. Provide good pure power compatible with USB-audio audio equipment. Humanized indicator light design, work status is clear at a glance. The green light (DATA) indicates that it is in the built-in power supply state. The red light (External Power) indicates the state of external power supply; Yellow light (Build in Power) prompts whether the USB signal is connected USB data and power supply: USB data, use good USB native signal. USB power supply, support internal/external two modes (PC SATA power supply and external power supply can be switched); Internal and external power supply can be judged by itself, switched automatically, and protected by itself. If the external power supply is lower than 4.8V or removed, it will automatically and seamlessly switch back to the built-in power supply. The equipment will not be lost or damaged. The external power supply is automatically disconnected after the PC is shut down to that the USB audio device is completely powered off, to prevent the no-load damage of the USB non-signal device, and to save the external power supply energy. There are options compatible with external power supplies, especially optimized design compatible with battery power supplies Automatic monitoring, automatically switch to built-in power supply when the battery loses voltage or is removed, without manual selection Automatically disconnect the external power supply without shutting down, protec