Automatic Soap Dispenser Adjustable Liquid Output 300mL Battery Powered

Ⅰ. Handwashing is imperative during cooking. If hands are coated in grease or after handling raw meat or poultry, the touchless soap dispenser can provide soap conveniently without contaminating hands. The automatic soap dispenser with a smart infrared sensor offers a sanitary, no-touch and easy-to-use experience. Ⅱ. Features: [Infrared Smart Sensor] The hands-free soap dispenser is equipped with a built-in accurate infrared smart sensor, with a sensing time of just 0.5 seconds to dispense liquid. [Adjustable Soap Quantity] It dispenses 1mL each time; if more is needed, keep hands under and wait another 2 seconds for another dispense. [Anti-leakage] The sealed rubber material at the bottom of the soap dispenser prevents soap leakage and keeps the dispenser from sliding on the countertop. [IPX6 Waterproof] The touchless soap dispenser features IPX6 rating deep waterproof technology to prevent soap or water from corroding the circuit board. [Visible Window] A visible window serves as a reminder to monitor remaining liquid and refill soap in time. Ⅲ. Specifications: Color: Light Brown; Dark Brown; Silver (This has no stripes, the picture is reflective); Blue (Optional). Material: ABS. Use mode: Infrared Induction. Induction distance: 2-3inch. Capacity: 300mL. Waterproof: IPX6. Temperature: 3-40℃. Working Voltage: DC 6V. Power Supply: 4*AAA Battery (Not Included). Occasion: Kitchen, Bathroom, Hotel, Bank, Hospital, etc. Product Size: 7.2*14.2*22cm / 2.83*5.59*8.66inch. Package Size: 14.5*7.5*22.3cm / 5.7*2.95*8.77inch. Package Weight: 333g / 0.73lb. Ⅳ. Package List: 1 * Automatic Soap Dispenser, 1 * User Guide. Ⅴ. Cautions: 1. Please follow the instructions or the product itself to properly install the battery with sufficient power; otherwise, the soap dispenser will not work. 2. Please ensure the liquid cover is well mounted; otherwise, the liquid will leak. 3. Do not use overly viscous soap, as it may not flow smoothly or be discharged; too thick soap can be diluted by adding an appropriate amount of water before use. 4. When using for the first time, a water test can be used to remove internal air. 5. For the first use, please try a few times to allow the liquid to fill the hose and dispense. 6. When the light is flashing, it indicates low battery; please replace the batteries. 7. If not used for a long time, check if the internal soap liquid has deteriorated, as deteriorated soap may block the outlet and prevent liquid discharge. 8. Do NOT shake the device to avoid serious damage. 9. The product is tested before leaving the factory, so it is normal to receive the product with water drops. Ⅵ. Note: Due to differences in light and screen settings, the item's color may slightly vary from the pictures. Slight dimension differences are allowed due to manual measurement.