Description:  Miniature circuit breaker with remote control the opening and closing function is mainly used for protection against overload and short circuit under the AC 50Hz/60Hz, rated voltage 230V/400V and rated current from 6A to 63A. It also can be used for non-frequent on-and-off switch operation under normal circumstance.  -Control module and MCB using the built-in drive.  -Can choose to open or close the RD module.  -The RD module can be locked by a padlock.  -In complicance with IEC/EN60898-1.  -With indicator function in the contact position.  -Bilateral bus bar wiring capabilities to adapt to the wider use of premises.  -Maximum connecting ability of 25mm2, wiring torque 3N*m, applicable to a variety of installing equipments, wiring stronger.    Specification:  Control mode: Autoreclose;  Supply terminals: A1-A2;  Voltage range: DC12V;  Supply voltage tolerance: -10%; + 10%;  Power input: DC max.1 W(standby) max.20W(action);  Voltage range: AC 220V(50-60Hz);  Supply voltage tolerance: -10%;+10%;  Power input: AC max.1 VA(standby) max.20VA(action);  Supply indication: red LED;  Action time: <1s;  Temperature coefficient: 0.05%/C,at=20℃(0.05% , at 68℃ );  Mechanical life: 6000;  Electrical life(AC1): 4000;  Operating temperature: -20℃ ~+55℃ (-4°F ~131°F );  Storage temperature: -35℃ ~ +75℃ (-22°F~158°F );  Mounting/DIN rail: Din rail EN/IEC 60715;  Protection degree: IP20;  Operating position: Any;  Overvoltage cathegory: III;  Pollution degree: 2;  Max.cable size(mm ): solid wire max.1 X2. 5or2X1. 5/with sleeve max.1 X2. 5(AWG 12);    Package included:  1 x Circuit Breaker