LCD Screen and Digitizer with Frame for ZenFone Max Pro (M1) ZB601KL ZB602KL ( ) The product is shipped based on the color or size of the main image of the product page. Before Installation 1. Tips 1: before installation testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. will prevent static electricity from damaging the electronic components within the phone. you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which mobile phone apart, (m board + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: over-bend cable Please make sure LCD cable does not over-bend. Over 90 degrees bent will cause black display. the product1. Replacement LCD screen + touch screen digitizer assembly with frame for ZenFone Max Pro (M1) ZB601KL ZB602KL 2. Replace the old, broken, cracked, damaged one 3. Make your device look more refreshing than ever 4. ly fit and work 5. Each item has been checked and in good condition before shipping 6. installation is highly recommended. We will not be responsible once the screen is installed.