Remote Control Clone for MARANTEC Digital D302 D304 D382 D384 D313 D321 D323 868.3MHz Garage Door Opener Replicator Compatible Models: Marantec Digital D382 868 Marantec Digital D384 868 Marantec Digital D302 868 Marantec Digital D304 868 Marantec Digital D313 868 Marantec Digital D321 868 Marantec Digital D323 868 Marantec Command 131 868 Not compatible with remotes operating on 433.92MHz Specifications: Operating Current: 8mA Working Frequency: 868.3MHz Modulation Mode: ASK (AM) Transmission Power: 100mW Emission Distance: 50 to 100 meters Encoding Type: Self-Copy Working Temperature: -20°C to +50°C Features: Wall-mountable base for convenient placement Quick cloning in 5 seconds, ready to use immediately after cloning 100% replacement for original MARANTEC remote control 868.3MHz Battery included with long battery life Reliable control range Programming Instructions – Simple and Easy Face-to-face copying with original remote control Step 1: Clear existing codes from duplicator 1. Press buttons A and B simultaneously until LED flashes 3 times 2. Release button B (continue holding button A), then press button B slowly 3 times until LED flashes 3. Release button A to complete code clearance Step 2: Copy code from original transmitter 1. Place the duplicator close to the original transmitter 2. Press and hold button A on the original transmitter, then press and hold button A on the duplicator until the LED flashes 3. Release both buttons to complete copying; repeat for other buttons as needed Package Includes: 1 x Remote Control 1 x Battery 1 x English Manual