495209 for Festool Splinter Guard Replacement Strip FS-SP 5000 for Festool Track Saw Guide Rail Acce Edition0612 2025

٤٦٫٩٥ ر.ق.‏
+ ٢٦٫٤٩ ر.ق.‏ الشحن

495209 for Festool Splinter Guard Replacement Strip FS-SP 5000 for Festool Track Saw Guide Rail Acce Edition0612 2025

  • العلامة التجارية: Unbranded

495209 for Festool Splinter Guard Replacement Strip FS-SP 5000 for Festool Track Saw Guide Rail Acce Edition0612 2025

  • العلامة التجارية: Unbranded
سعر البيع القطاعي المقترح: ٩٤٫٠٠ ر.ق.‏
السعر: ٤٦٫٩٥ ر.ق.‏
أنت توفر: ٤٧٫٠٥ ر.ق.‏ (50%)
البائع:
٤٦٫٩٥ ر.ق.‏
+ ٢٦٫٤٩ ر.ق.‏ الشحن

في المخزون

نقبل وسائل الدفع الآتية

الوصف

Usage Tips:Compatibility: 495209 for festool splinter guard replacement strip replace 495207 for festool splinter guard replacement strip and is compatible with for festool FS/2, FS/2 KP, and FSK guide rails & festool rail saws. Periodically replacing your splinter guard can keep your cuts perfectly splinterfree, especially if you are switching between , or using the guide rail with more than one saw. Function: You can replace the Splinter guard as needed to ensure perfect alignment of the guide rail with the cutting line, and to prevent tearing during parallel and lateral cutting. The Splinter guard can perfectly match the saw blade, accurately align the cutting line, and save valuable setup time. Clear Splinter guard enhance visibility of the cutting line. High-quality: For festool splinter guard replacement stripis made of soft rubber, and uses strong adhesive, with a strong viscosity and high parency. It can tightly adhere to your guide rail without falling off easily. Easy to replace: As the splinter guard is cut into upon the first use, it reflects the exact cutting edge, meaning that it can be applied exactly at the scribe mark. You just need to remove the tape to use it. It's very simple. NOTE: You need to clean the rail with acetone and leaving surface grease free prior fitting the splinter guard. NOTE On a clean working surface, there is no risk of dust or debris getting on the tape. Pull off the adhesive strip or tape with the actual splinter guard to avoid sticking debris. Before installing the splinter guard, please use a shovel and acetone to remove remaining adhesive. When you re-apply the splinter guard, you can move it out a portion to allow for clean cutting. Colour:Photo Color Material:plastic Package Contents: 1 x Track Saw Guide Rail Only the above package content, other products are not included. Note: Light reflection and different displays may Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement. Sold by-Minnanxin
  • هوية Fruugo: 412523528-872206762
  • EAN: 6097264102056

معلومات سلامة المنتج

يرجى الاطلاع على معلومات سلامة المنتج الخاصة بهذا المنتج الموضحة أدناه

يتم توفير المعلومات التالية من قبل بائع التجزئة المستقل التابع لجهة خارجية الذي يبيع هذا المنتج.

ملصقات سلامة المنتج

CE Mark
تحذيرات السلامة: Not suitable for children under 36 months
مكونات: Others

التسليم والرد

يُرسل خلال 24 ساعة

  • STANDARD: ٢٦٫٤٩ ر.ق.‏ - التسليم بين الثلاثاء 30 سبتمبر 2025 – الأربعاء 08 أكتوبر 2025

يُشحن من الصين.

نحن نبذل قصارى جهدنا لضمان أن تصلك المنتجات التي تطلبها بالكامل وطبقاً المواصفات التي حددتها. إلا أنه في حال تلقيك طلب غير كامل أو أغراض تختلف عن تلك التي طلبتها أو كان هناك سبب آخر يدعوك لعدم الرضاء عن الطلب، فيمكنك رد الطلب أو أي منتجات يتضمنها الطلب واسترداد ما دفعته من أجل تلك الأغراض بالكامل. عرض سياسة الرد الكاملة