feature:Color: black+silver (as pictured)Type: Automatic Remote CopierWeight: 50 gramsMaterial: metal + plasticSpecification:Working voltage: DC12V (27A battery not included)Working current: 8mAWorking frequency: 433MHzModulation method: ASK (AM)Transmission power: 100mWLaunch distance: 100 m (proven)Encoding type: self-replicatingWorking temperature: -10C to +50CWorks with the following remote control IC modules (please check your original remote control before ordering), and your remote control should also be fixed code or learn code. AX5326-3. PT2262. PT2260. EV1527. FP527. PT2242. HT600. HT680. HT6207. HT6010. HT6012. HT6014. AX5326 4. SMC918. PT2240. HT6013. HT6013. HT12D etc.Applications: garage doors, motorcycles, car anti-theft products, home security products, short-distance wireless remote control products, industrial control productsHow to program:Step 1 Delete the existing code for our remote copier1) Click and hold the A and B buttons simultaneously - the LED will blink 3 times2) Press and hold the A button and release the B button3) Hold down the A button and press the B button 3 times, the Led will start to flash continuouslyNow press any button on the remote control, if the LED light is off, the code is successfully deleted; if the button is pressed, the LED light is on, indicating that the original code has not been deletedStep 2 - Clone the original remote1) Put the two remotes in back-to-back position. Make sure they have a direct connection2) Click and hold 1 button on the original remote and 1 button on the cloned remote. Press and hold until the LED blinks 2 times, then 3 times, then goes steady and you have successfully cloned. (Left button is the same as above)If for some reason the clone doesn't go further then flashes 2 times, that means the signal isn't getting through, move the remote up and down slowly until you get to the point where it will get through.Package Contents:1 x Remote Control Duplicator