4 Heart Shaped Madeleine Cake Mould Silicone Mold Baking Small Love Heart Shapeproduct description:Suitable for baking on Valentine's Day1. After the first and every use, wash with hot water (diluted edible detergent) or put it into the dishwasher. Do not use corrosive detergent or foam to clean. Make sure that the silicone mold is completely dry before each use and storage. The silicone is prone to electrostatic reaction and will absorb Du st in the air. Do not use it for a long time and avoid direct exposure to the air.2. When baking, the silicone mold should be separated and placed on the baking plate. Do not let the mold dry. For example, if you only fill three molds in a six connected mold, the other three molds must be filled with water. Otherwise, the mold will be damaged and the service life will be reduced. In order to achieve the best baking effect, a small amount of an ti stick baking oil can be sprayed on the surface of silicone mold before baking.3. When the baking is finished, please remove the whole baking tray from the oven, and place the baked products on the grid to be cooled to cool completely.4. The silicone mold can only be used in the oven, oven and microwave oven. It must not be used directly in the gas electricity or directly above the heating plate and below the barbecue.5. Don't use knife or other sharp tools on silicone products. Don't press or pull violently.6 silicone mold (because of the relationship between static electricity), it is easy to absorb Du st, when not in use for a long time, it is best to put the carton, stored in a cool place. 7. Some of the molds have cracks, which have been cut when they leave the factory, so it is convenient for the buyer to demould. If it is impossible to demould without the incision, wrap the incision with plastic film or cover it with rubber band before pouring the liquid. Notes:The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightnessPlease allow slight manual measurement deviation for the data.Package Content:1*Silicone mold