Large size: 56*35*31mm, aperture 4.5mm, hole spacing 38mmSmall size: 47.5*29*29mm, hole diameter 4.5mm, hole spacing 29mmLarge square clip, zinc alloy version, can clip 5-10mm thick glass.Square small clip, zinc alloy version, can clip 4-7mm thick glass.Open-hole glass hinge, with its own positioning, strong and stable.It is suitable for all kinds of small cabinets, shoe cabinet doors, glass cabinet doors, wine cabinet display cabinets and other small cabinet doors.The width of the door should not be greater than 40cm, the height of the door should not be greater than 70cm, and the glass should not be punched. 1 door needs at least 2 hinges. If the door is too large, it is recommended to install 3 hinges. The door height cannot be greater than 100cm.The height of the glass door is not more than 70cm, the width is not more than 40cm, and 2 are installed. The height of the glass door is not more than 100cm and the width is not more than 40cm, and 3 are installed.Positioning card slot, using the positioning card slot design, when the hinge is at a right angle, it can be fastened and fixed to avoid the situation of wind blowing the door swing, and there is no need to install magnetic touch fixing glassAnti-skid gasket, rubber gasket, soft and tough, increase friction, effectively protect the glass from damage and more non-slip fitThickened material, solid thickened plywood is selected, which is strong and wear-resistant, and the load-bearing is stronger and more stable.Positioning the bead, using the positioning card slot design, when the hinge is at a right angle, it can be fastened to prevent the cabinet door from opening automatically