Features: <br> <br>The cutter heats up quickly, very convenient to use. <br>It cuts the foam smooth and fast, seals the edges clean, and leaves no debris. <br>Ergonomic design handle with start switch that make it easier to operate, comfortable to hold. <br>It features over-voltage protection, over-current protection and overheating protection. Automatic power-cut after overload, increased service life. <br>Perfect for polystyrene foam cutting, carving and write words on the foam. <br> <br>Specification: <br>Model: AIK-50 <br>Material: Nickel-chromium alloy <br>Weight: 245g/8.6oz <br>Power: 24W <br>Normal temperature resistance: 20 <br>Maximum temperature resistance: 1500℃ <br>Pen Point Length: 20cm/7.9inch <br>Voltage: 110-250V <br>Plug Type: UK Plug <br> <br> <br>Product Usage Information: <br>There are some errors in the length of the pen tip due to different factory batches <br>Work continuously for no more than 0.5 hours, accumulatively no more than 2-3 hours <br>Pen power supplies of different lengths cannot be mixed. Each heating pen has its own independent power. Mixed use is either not hot or will burn. <br>1. The heating tube of the cutting pen can only be bent once, not repeatedly at one point. Bending repeatedly at one point may cause breakage <br> <br>2. Because of its special structure, the cutting pen can only cut medium and low density foam, and cannot cut materials other than foam. It is not suitable for high density or batch cutting. <br>3. Continuous cutting does not exceed half an hour, the power supply of the cutting pen has a switch, and the power supply can be prolonged after cutting off <br>4. We will test the power again before shipment, so the pen will have slight foam marks, please rest assured to buy <br>5. If you need to work for a long time, please choose a desktop cutting machine <br> <br>Package Includes: <br>1 x Foam Cutting Pen <br>1 x Power Adapter <br> <br>Note: <br>1. Do not touch any hot surfaces. The tips will become very hot during operation. <br>2. The continuous operation shall not exceed 0.5 hours, and the cumulative time shall not exceed 2 to 3 hours <br>3. Please allow 1-3mm error due to manual measurement. Thanks for your understanding.<br>1、The cutter heats up quickly, very convenient to use. <br>2、It cuts the foam smooth and fast, seals the edges clean, and leaves no debris. <br>3、Ergonomic design handle with start switch that make it easier to operate, comfortable to hold. <br>4、It features over-voltage protection, over-current protection and overheating protection. Automatic power-cut after overload, increased service life. <br>5、Perfect for polystyrene foam cutting, carving and write words on the foam.