Quick And Easy Installation It Only Takes Seconds to Install the Door Draft Strip. Before Installation, Just Wipe Off The Dust. Tear Off The Silicone Sealing Tape and Stick it to the Appropriate Position. Cut To A Suitable Length as Needed, And Then Stick it to The Gap or Frame. A Dry, Dust-Free, Water-Free Surface Will Produce The Best Results. If The Temperature is Low, It is Recommended to Heat the Adhesive On The Back With a Hair Dryer.Precise Sizing For Versatile Applications Our Door And Window Seal Tape is 16 Feet Long. The Total Width is 1.77 Inches (45 MM) and The Adhesive Backing Width is 0.6 Inches (15 MM). Suitable For Gap Widths From 0 to 1.18 Inches (0 - 30 MM). There are Multiple Widths to Choose From, And You Can Choose The Most Suitable Width According to The Gap Size. For Example, A 35 - MM - Wide One For 0 - 20 - MM Gaps, And A 45 - MM - Wide One For 0 - 30 - MM Gaps.Warm Tips: 1. In Cold Weather, We Recommend Heating The Adhesive With A Hair Dryer For 2 Minutes Before Installation 2. Please Make Sure The Surface is Dry And Clean Before Installation. 3. After The Glue is Applied, Press The Door Gap Several Times And Leave It For 24 HoursWide Range Of Applications This Multifunctional Sealing Strip Can Be Used For Various Types Of Doors And Windows, Such as Frameless Sliding Doors, Glass Doors, Door Bottoms, Plastic Steel Windows And Aluminum Windows, Cabinets, Wardrobes, Furniture, Sliding Doors, Shower Rooms. It Can Effectively Prevent Wind, Dust, Wind And Rain, And Save Energy. In Addition, It Also has Anti-Collision And Energy-Saving Effects, Which Can Protect Your Doors And Windows From Impact. It is An Ideal Choice for Energy-Saving And Anti-Collision Home Improvement Projects. Weather Conditions, Will Not Be Damaged By Sun and Rain, And Can Work Well in Wet Areas. Even in The Worst Storms, You Don't Need to Worry About it Falling Off!