This PoE extender features one 30W PoE input port and two 15W PoE output ports, with a cable to connect to 2 POE IP devices. Extend your Ethernet network range by an additional 100m (328ft). Expand your PoE installation area by an extra 100m. A maximum of 6 units can be cascaded for a total range of 700m (2296ft). Supports 10/100 Mbps data rates, compliant with IEEE802.3at and IEEE802.3af standards. Provides 802.3af power when powered by any 802.3at source. Cost-effective installation – no local power or other configuration required. Powered via the PoE input; plug and play. Automatically detects and protects PoE equipment from damage due to incorrect installation. It can forward both Ethernet and PoE power for 1 terminal device via Cat5, Cat5e, Cat6, Cat6e, UTP cable (less than 120m). PoE Input: 1 RJ45 port (DC 48-57V) PoE Output: 2 RJ45 ports Max Power Input: 30W Max Power Output: 15.4W Network Medium: Cat5, Cat5e, Cat6, Cat6e, UTP cable (less than 120m) Distance: Up to 700m (6 units) Repeater Mode: Forward Address Table: 2K Packet Buffer Memory: 48 Switching Capacity: 400 Mbps PoE Standard: IEEE 802.3af/at PoE Cable Core: 1/2(+), 3/6(-) Power Mode: Mode A, End-Span LED Display: PoE working status, Ethernet Network Protocol: IEEE 802.3i-10BASE-T, IEEE 802.3u: 100BASE-TX, IEEE 802.3x-Flow Control, IEEE 802.3af-Power over Ethernet. Storage Humidity: 5%~90%, non-condensing Color: Black Material: Plastic Size: 88 x 44 x 22 mm Package Contents: 1 x 2-port PoE Extender Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3 cm.