18F25K80 V1.5 ELM327 With Code Reader OBD2 Scanner For Ford /MS CAN Top 4 Reasons to Get Plastic USB ELM327: 1: Latest ELM327 includes 25K80 and CH340T. 2: Manufactured modification to include a to connect to different CAN buses, MS CAN bus and CAN bus. 3: Designed for FORScan software, compatible with software venders; for FORScan, for Elmconfig, for FF2 and for FoCCCus, plus more. 4: Support Windows XP and WIN7 32bite. With the cable and the one of the supported software vendors you can detected modules which are not visible for regular OBD2 scanners. This includes showing you trouble codes, P, running tests and services procedures which are never displayed by other OBD2 scanners and a standard ELM327. OBDII Protocols: SAE J1850 PWM (41.6Kbaud) SAE J1850 VPW (10.4Kbaud) ISO9141-2 (5 baud init, 10.4Kbaud) ISO14230-4 KWP (5 baud init, 10.4 Kbaud) ISO14230-4 KWP (fast init, 10.4 Kbaud) ISO15765-4 CAN (11bit ID, 500 Kbaud) ISO15765-4 CAN (29bit ID, 500 Kbaud) ISO15765-4 CAN (11bit ID, 250 Kbaud) ISO15765-4 CAN (29bit ID, 250 Kbaud) SAE J1939 CAN (29bit ID, 250xKbaud) CAN (11xbit ID, 125xKbaud) CAN (11xbit ID, 50xKbaud) Specifications: Product Name: OBDII Product Type: 25K80 Hardware version: V1.5 Communication method: USB (with ) Main control chip: 18F25K80 Interface Description: 16pin OBDII standard Working voltage: 12V Working temperature: -20 C 70 C Working humidity: less than 60% Package size: 10 X6.5 X2.5cm / 3.9 X2.6 X1in Package weight: 120g Material:Plastic Basic Features: Reset fault /trouble codes / parameter (P) Change car configuration data Run tests Services procedures Program certain models Pin Configurations: position one: CAN - Occupies pins 6 and 14 position two: MS CAN - Occupies pins 3 and 11 Supported Software: For FORScan For Elmconfig For FoCCCus For FF2 Plus more ELM327 supports CAN from the stock, because for CAN completely matches to the OBD2 standards. It occupies pins 6 and 14. MS CAN bus occupies pins 3 and 11. Supported Vehicles:Many vehicles that can be addressed using an ELM via an OBDII connector. Please note that many models (approximately since 2003-2004) are equipped with MS CAN bus, in addition to the regular CAN bus. In contrast to CAN bus, MS CAN bus is not supported by the stock ELM327, because MS CAN is a manufacturer-specific solution and located on non-OBD2 pins. This ELM327 has been modified to allow it to implement the MS CAN bus. Package Content: 1 XELM327 Diagnostic Interface 1 x Label: Yes