["Feature:\nPromotes much for stronger adhesion bond with double sided tape than rubbing alcohol\nA must have for any automotive application that require a for stronger bond with double sided tape\nLiquid primer 94 prepackaged in a single use packet wipe form for convenience\nExtremely useful for applying double sided tape onto trims, \nexterior car body parts, moldings / mouldings, body kits, front lips,\nside skirts, spoilers, wings, carbon fiber parts\n\nTips for using\n1: Surface Preparation: \nThe bonding surface must be relatively clean and dry. \n2: THIS IS NOT A GLUE AND CANNOT BE USED SOLELY AS A GLUE. \nTHE ADHESION PROMOTER IS FOR BETTER ADHESION OF YOUR TAPE. \nYOU NEED TO APPLY IT ON A TAPE OR ANYTHING ADHESIVE.\n3:Clean-up:\nContaminated surfaces should be cleaned\nwith a 50/50 Isopropyl Alcohol and water mixture.\nVigorous scrubbing may be required.\n\nApplication:\n - Leave the primer 94 for a few minutes before applying tape. \n This is usually accomplished in 5 minutes at normal temperature.\n - Avoid any contacts with eyes and skin.\n - This product is unsuitable for kids.\n\nType: Primer\nPrimer is for plastic materials. \nFor use with acrylic.\nSize:\nSmall:50x50cm/2\"x2“”\nLarge:55x60cm/2.2\"x2.4\"\nQuantity:100 Pcs\n\nPackage include:\n100 Pcs Adhesion Promoters"]