Features: - Controller using 8MHz external crystal for better measurement accuracy. - Automatically detects NPN, PNP bipolar transistors, N-channel and P-channel MOS FET, JFET, diodes, dual diodes, thyristor, small power key resistance using thousandths of metal film resistors, remaining hundredths of metal film resistors. - Unidirectional and bidirectional thyristor. - One-button operation, auto-shutdown with only 20nA shutdown current. - Each test takes about two seconds, with only capacitor and inductance measurements taking longer. - Can display in the correct order and diode symbol showing two diodes, and provide diode forward voltage. - Low power LCD backlit LCD display, negligible compared to full power, so the light is always on, easy to read in the dark. Specifications: - Shutdown Current: 20nA - Resistance Measurement: Max. 50M - Resistance Resolution: 0.1 - Capacitance Measurement: 30pF~100mF - Capacitance Resolution: 1pF - Inductance Measurement: 0.01mH-20H - Size: 123 x 80 x 33mm / 4.84 x 3.15 x 1.30 inches - Automatic transfer type, pin, power amplification, and base-emitter junction voltage measured simultaneously. - Automatic identification of N and P MOSFET type and pins, measures voltage and capacitance. - Automatic identification of diode pins, measures forward voltage. - Automatic identification of small triac power. - Resistance measurement. - Inductance measurement. - Capacitance measurement. - One-button operation, auto-shutdown. - 20nA shutdown current is only approx. - Uses 8MH crystals. - Can automatically detect NPN, PNP bipolar transistors, N-channel and P-channel MOS FET, JFET, diodes, dual diodes, thyristor, small power unidirectional and bidirectional thyristor. Note: Before measuring capacitance, the capacitor must be discharged, otherwise the meter will most likely be damaged. Color: As shown Material: Plastic Package Contents: 1 x Capacitance Tester Only the above package contents are included, other products are not. Note: Light reflection and different displays may cause the color of the item in the picture to be slightly different from the real thing. The allowable measurement error is +/- 1-3 cm.