[Steel Dowel Jig Plate] mould steel is cnc laser cut, all arcs are adopted with folded edges to roundness and anti-scratch. High-temperature quenching to 58-62 degrees, the surface sandblasting to heat treatment of the oxide layer, high-power laser engraving, and finally the surface nickel plating to form a corrosion-resistant layer. [Practical Dowels] screw holes are reserved at both ends, making it easier to fix on the workbench. The bottom diameter of the hole is slightly enlarged by chamfering to easier for the wooden dowels to pass through each hole, so the cut is clean and the wooden dowel rods does not get stuck during the process [Dowel Cutter for Diameter] length :15.2cm/6in, width .:5cm/2in, thickness :1cm/0.39in. 1/8inch 5/32inch, 3/16inch, 7/32inch, 1/4inch 9/32inch, 5/16inch, 11/32inch, 3 /8inch, 13/32inch, 7/16inch, 15/32inch, 1/2inch, 17/32inch, 9/16inch,19/32inch, 5/8inch [Wide Applocation Wood Dowel] the compact design of the dowels tool is more convenient to carry and use, with clearly marked dimensions for accurate measurement. Suitable for all kinds of hardwood and softwood, widely used in woodworking, construction, industrial manufacturing, etc. [More Suitable for Short Pins] before use, please cut off the 4 corners of the front end of the blank to slightly rounded, then use a tool to knock it into the steel dowel plate , then move the blank to another size hole, repeat the previous step until Achieve the desired effect, then polish and you're done. Please note:the physical slightly color difference or difference, does not affect the use, please do not mind, thank you! Colour:Silver Material:steel Package Contents: 1 * Steel Dowel Plate Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.