1. This kit solves the daily of the electric scooter, greatly reducing the time you have to look for one part everywhere.2. Designed to measure components that avoid slack in the handlebars to avoid -ups and better adjustments and pressures in the folding of the shaft. Includes three measures: 0.4mm, 0.6mm and 0.8mm. 3. It may be necessary to adjust the screws in the parts that the shaft so that they can be closed by internal parts. The rigid material , closed, provides maximum pressure on the shaft and is the most effective material for more than 3,000 customer tests.4. Practical hook design and resistance to take bags on your scooter and safely. The resistance of advanced models is other models.5. Rigid support of the rear . It eliminates the possibility of the LED cable contacting the wheel and also eliminates the free movement of the fixed remaining . The must be removed in a simple manner by removing the 3 screws that can be used to mount the workpiece.6. The flexible material cover for the legs prevents metal damage and prevents noise by directly contacting the earth.colour:blackMaterial:plasticsize:13.8*3.8 cmPackage Contents:1 * hook1 * Energy protection cover3 * Accessories2 * screw1 * screwdriver1 * rear bracketOnly the above package content, other products are not included.Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.