Original LCD Screen for Fitbit Sense 2 Digitizer Full Assembly About the product 1. Replacement LCD screen and touch screen digitizer assembly for Fitbit Sense 2 2. Replace your broken or non-functional screen with a new one 3. Restore your device to a like-new appearance 4. Designed to fit and function properly with compatible devices 5. Each unit is tested and inspected for quality before shipment 6. Professional installation is highly recommended. We are not responsible for damage occurring after installation Before Installation Notes Tip 1: Test before installation Do not remove any protective film or labels when testing. Handle with care to avoid static electricity. Before starting the repair, ground yourself using an ESD (electrostatic discharge) strap to prevent damage to internal components. Wear eye protection and handle the glass carefully to avoid injury from sharp edges. Tip 2: Perform a test fit Screen replacements are delicate. Test the display before full installation. Partially disassemble the device, connect the motherboard to the new LCD screen and audio cable, power on the device, and verify proper function. If the screen works correctly, proceed with full installation. If the screen does not display, contact the seller immediately. Do not force installation if issues are present. No responsibility is assumed after installation. Tip 3: Avoid cable damage Do not bend the LCD cable beyond 90 degrees. Excessive bending may result in display failure or black screen.