Full Fault Code Text Description: 1) Full status information (Present, Not present, Intermittent) 2) You can print out, save, or copy the fault codes to any other application. From the fault codes window, you can go directly to the measuring blocks window. 3) The program shows you measuring block information on many control module, you can choose anything from the list on your own. 4) The program is capable of showing 8 measuring block parameter simultaneously. The sample rate is depends mostly on the communication protocol. For example, older system, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication, while newer Multec, or Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast! You can also run output tests on many controllers. PIN6-PIN14 PIN3-PIN11 PIN1 HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps Note: Only supports Win 7 or XP systems. The product only supports 2014 and earlier For Opel cars, post-2014 models are not supported. Package list: 1pc x OP COM Interface(V1.99 version) 1pc x USB Cable 1pc x Software and Drivers CD