You can make local, domestic, and international calls with this terminal by connecting a desktop phone and a SIM card. Suitable for alarm systems. Compatible with GSM 850/900/1800/1900 MHz networks, widely used with many service providers. Simple to install and easy to maintain. A directional higher gain antenna can be connected to improve poor signal coverage. Compatible with PABX, alarm systems, recording systems, and more. Plug Type: EU Plug, suitable for use in Indonesia, Germany, France, Spain, Italy, and other countries. How to use this device: Step 1: Install a SIM card – Insert the SIM card only when the terminal is powered off and the AC adapter is disconnected. Step 2: Connect the antenna – Use a mobile phone to locate the area with the strongest signal, then place the antenna there. Avoid placing the antenna too close to the terminal, as it may interfere with signal reception. Step 3: Connect your terminal to a desktop phone – To make calls, connect the telephone line to the RJ11 phone port on the GSM terminal and the telephone set. There is one communication port on the side of the terminal, allowing connection to one desktop phone. Step 4: Connect the power adapter and turn on the power. Step 5: Wait a moment for the device to acquire GSM signal and enter normal operation mode. Step 6: Make calls using the connected telephone set. Specifications: 1. Network support: GSM 850/900/1800/1900 MHz 2. Frequency range: - GSM 850 MHz (Transmit: 824–849 MHz, Receive: 869–894 MHz) - GSM 900 MHz (Transmit: 890–915 MHz, Receive: 935–960 MHz) - GSM 1800 MHz (Transmit: 1710–1785 MHz, Receive: 1805–1880 MHz) 3. Operating voltage: DC 5V–12V 4. Telephone line length: 150 cm Color: White Material: Plastic Dimensions: 120 x 85 x 28 mm Power input: AC 220V Package Contents: 1 x Wireless terminal 1 x Antenna 1 x EU plug 1 x Telephone line Note: The package includes only the items listed above. Other products are not included. Light reflection and differences in display screens may cause slight variations in color between the product image and the actual item. Measurement error allowed is +/- 1–3 cm.