selectable output current with dip switch • 180-295 Vac input only • Built-in active PFC function • Protection against: Short circuit / Overvoltage / Overtemperature • Cooling: Free air convection • Fully insulated plastic housing • Class II power unit, No Fg (Frame Ground) • Built-in 0-10 Vdc and Pwm signal dimming function • Built-in 12 V / 50 Ma auxiliary output • Logarithmic or linear fog curve Selectable (meets Iec62386-207) • Temperature compensation of external Ntc thermistor ( Not incl.) • No-load power consumption: Operating temperature: -30 to +60°C,C Operating humidity: 20-90% Rh Non-condensing Storage: -40 to +80°C, 10 -95% Rh Temperature coefficient: &Plusmn, 0.03%/&Deg,C (0-50°C) Vibration: 10-500 Hz, 2G 10 min/1 cycle, period for 60 min each along the X, Y, Z axes •• Functional specifications: Auxiliary power: 12 V @ 50 Ma for drive fan, tolerance and plusmn, 5% Temperature compensation: With external NTC thermistor (not included with the power supply) Dimming Synchronization •• Input specifications: Voltage range: 180-295 Vac 254-417 Vdc Frequency range: 47-63 Hz Power factor (type): >,= 0.975 / 230 Vac, >,= 0.96 / 277 Vac at rated power Total harmonic distortion: lower than 20% when the output power is 75% or higher Efficiency (type): 92% AC current (type): 0.32 A / 230 Vac, 0.27 A / 277 Vac Inrush Current (Type): Cold Start 20 A (Width = 260 & Micro,S measured at 50 % Ipeak) At 230 Vac Leakage Current: <, 0.5 Ma / 240 Vac •• Mean Time Between Faults (Mtbf): Mtbf: Min. 260 600 H, Mil-Hdbk-217F (25 Â,&Deg,C) •• Protection Specifications: Short Circuit: Constant Current Limiting, Automatically Resets After Removing the Fault State Overvoltage: 105-125 V Protection Type: Turn off the output voltage, turn back on to reset Over temperature: Turn off the output voltage, turn back on to reset •• Safety and EMC Specifications: Safety Standards: Ul8750, Enec En61347-1, En61347-2-13, En62384 independently approved Withstand voltage: Input to output: 3.75 Kvac Insulation resistance: Input to output: >100 mohm / 500 Vdc / 25°C,C / 70% Rh EMC emission: Compliance with En55015, En61000-3-2 Class C (>,= 40% power rating), En61000-3-3 EMC immunity: Compliance with En61000-4-2,3,4,5,6,8,11, En55024, En61547 Light Industry Level (Surge 2 Kv), Criteria A • Technical data: •• Power: 60.3 W •• Dimmable: Yes •• Power specifications: Selectable current: 500 Ma / 600 Ma / 700 Ma / 900 Ma / 1050 Ma / 1400 Ma DC voltage: 2-90 V / 2-90 V / 2-67 V / 2-86 V / 2-67 V / 2-57 V / 2-42 V Rated power: 60.3 W Ripple Current: &Plusmn, 5.0% Ripple & Amp, Noise (Max.): 700 Mvp-P No-load output voltage (max.): 95 V / 73 V Current accuracy: &Plusmn, 5.0% Setting rise time: 500 Ms, 80 Ms / 230 Vac at rated power Dwell time (typ): 16 Ms / 230 Vac at rated power • Setting options: •• Dimming type: Pwm • Environmental data: •• Place of use: Indoor only • Operating characteristics: •• Power factor correction function (Pfc): Yes.