Die-cut vinyl decals/car stickers made from premium quality vinyl - Easy application. It is self-adhesive and will not fade or stand up. - Sticks to any smooth surface: laptops, walls, cars, windows, bumpers, guitar, iPad, iPhone, refrigerator. Size and Color - If you need a specific size, please let us know. - Images can be reversed upon request. You can send a message to paste inside (reverse printing). - If you have a specific image you would like to make, please send me a message. - Colors may vary slightly from the photo. - The color you choose will be the color of the actual vinyl sticker - There will be no background, the background becomes whatever you stick to it. The vinyl sticker consists of three functional layers:1. The top layer is a mounting film (clear transfer tape), has a weak adhesive layer facing the sticker and is designed to transfer it to a smooth surface.2. The middle layer is the vinyl sticker itself.3. The lowest layer is a siliconized paper/clear film that protects the sticker's adhesive layer from contamination and damage. Application instructions which:---- Step 1: Clean surface.---- Step 2: Prepare the decal. With the design facing down , slowly peel off the backing. If the decal sticks to the surface of the backing, stop and roll it up a little and try again.---- Step 3: Apply the decal. Carefully place your design in the desired location with the sticky side of the transfer tape and the design facing the target. You can gently wipe away any imperfections or bubbles with a credit card. (The more design you get to stick, the easier it will be to remove the transfer tape).---- Step 4: Remove the Transfer Tape. Very slowly remove the transfer tape from the surface. Do not rush. After removing the backing, the sticker should stick to the surface.