High quality SATA SSD adapter converts mSATA SSD to 2.5 inch PATA/IDE interface. Supports mSATA SSD sizes 3 cm x 5 cm or 3 cm x 7 cm only. No driver required, stable performance. This product supports interface conversion from mSATA to 2.5 inch PATA/IDE. It does not support SATA Mini PCIe or PATA Mini PCIe SSDs. TRIM command is supported under Windows 7/8 operating systems. Not compatible with very old laptops; BIOS should be updated to the latest version for optimal compatibility. When installing, align the adapter card properly and insert into the machine slot. Slight left or right adjustment may be needed for proper fit. Some computers may not recognize the adapter due to variations in BIOS settings or hardware configuration. This is a DIY product and minor size deviations may occur. Supports UDMA5 mode; actual working mode depends on the laptop’s BIOS. Some laptops may operate only in UDMA-2 mode due to outdated BIOS or shared IDE channel with optical disc drives. Material: ABS Color: Black Package Contents: 1 x Adapter Card with Case 1 x Set of Screws Note: Other items shown are not included. Color may vary slightly due to lighting and display differences. Measurement tolerance: +/- 1-3 cm.