Welcome to our store! 1、PARAMETERS: The linear sliding table has an effective stroke of 150mm, a step angle of 1.8 degrees, a diameter of 6mm, a lead of 1mm, and a pitch of 1mm (one revolution of the lead screw can move 1mm). 2、SIMPLE RAIL: The linear stage table features a single rail design, which is stable in operation and low in noise, suitable for the X, Y, and Z axes. 3、METAL STRUCTURE: The linear motion stage is made of premium alloy, with a thickened bottom plate to ensure stability during operation. 4、PROFESSIONAL PERFORMANCE: This linear sliding table has the advantages of large horizontal and vertical loads, high positioning accuracy, high efficiency, and good stability. 5、APPLICATION: Widely used in DIY CNC milling machines, detection equipment, optical measurement, fine-tuning displacement, mechanical positioning, etc. Item Type: Linear Sliding Table Material: Alloy Effective Stroke: Approx. 150mm / 5.91in Load: Horizontal Less Than or Equal to Approx. 5kg / 11lb; Vertical Less Than or Equal to Approx. 1kg / 2.2lb Positioning Accuracy: ± 0.1MM Holding Torsion: 6N. cm Current: 0.6A Resistance: 5.5 Ω Inductance: 3.2MH Speed: 0 to 120mm/s Step Angle: 1.8 degrees Screw Rod: 2 Diameter: Approx. 6mm / 0.24in Lead: Approx. 1mm / 0.04in Pitch: Approx. 1mm / 0.04in (the lead screw can move 1mm in one revolution) 1 x Linear Sliding Table Customers are our top priority. If you discover any problems with your product after receiving it, such as damage or incorrect quantity, please contact us immediately. We strive to provide you with the best after-sales service.